Iris Smart Plug Iris by Lowe’s Simplifies Smart Home Management

Iris Smart Plug

Iris Smart Plug



Lowe's Item # 690407
Manufacturer Model # 3210-L
Battery - None (Plugs into Wall)
Type of Wireless Communication - ZigBee HA 1.2, Z-Wave
Note: This device is not compatible with Iris 1st Generation Hubs

Pairing a New Device

Step 1: In the Iris app, tap the plus sign, then "Device."

Step 2: If searching by “Brand” select “Iris,” select “Smart Plug.” If searching by “Category,” select “Energy” then select “Smart Plug.”

Tip: You might want to check to make sure the green light is flashing on the hub. This means it’s in pairing mode.

Step 3: Insert the plug into any wall outlet. The hub will triple beep when pairing is complete.



Factory Reset Instructions
 
Use Case: When the device has been force removed from the App or the device has pairing and/connectivity issues.
 
Step 1: Remove the Smart Plug from the outlet and wait ten seconds.

Step 2: Press and hold the small white button on front of the plug. While holding the button, insert the Smart Plug back into the outlet. As soon as the LED on the front of the plug lights up, release the button.

Step 3: To repair the device, put the hub in pairing mode to by tapping on the plus sign in the app, and then “Device”.

Step 4:
If searching by “Brand” select “Iris,” select “Smart Plug.” If searching by “Category,” select “Energy” then select “Smart Plug.”

Tip: You might want to check to make sure the green light is flashing on the hub. This means it’s in pairing mode.

Step 5: Make sure the plug is inserted into a wall outlook in the same room as the hub. The hub will triple beep once pairing is complete.
 

FAQs


Next Gen - What if my hub does not have enough range to reach all of my devices?

Technical Specifications
  • Power
    • Rated: 120 VAC, 60 Hz
    • Output: 12A, General Purpose
  • Environmental
    • Operating Temperature: 0° to 40°C
  • ​Shipping and Storeage
    • ​Temperature: -20° to 50°C
    • Humidity Range: 0 to 90% RH. (non-condensing)
  • Wireless RF Protocol
    • Protocol: ZigBee HA 1.2, Z-Wave
    • TX Strength: +18 dBm
    • RF Channels: 16
    • Range: 260+ ft. (80m) LOS
  • ​Compatibility
    • The Lowe's Iris Contact Sensor is fully ZigBee HA 1.2 certified and will work with other open ZigBee HA 1.2 certified systems.
  • ​Alias: smartplug

Download the full Spec Sheet here: pdf Smart Plug
Rating:Rating of 2 Stars15 Votes
Was this answer helpful?YesNo
Topic Information
  • Topic #: 30143-547
  • Date Created: 12/05/2015
  • Last Modified Since: 08/15/2016
  • Viewed: 12753

SUPPORT

Help & Resources for
Your Iris Smart Home

Contact Us

Questions about Iris? Call us now for immediate assistance.
Hours of operation: 8am – 1am EST

1-855-469-IRIS