Vizia Electrical Outlet

Vizia Electrical Outlet

Vizia Electrical Outlet

Pairing the Device to the IRIS Hub
  1. Install the electrical outlet as described in the printed instructions included with your device.
  2. Once installed, pair the device by pressing the button on the front once. The hub will beep when pairing is complete.
Device Removal

Do not use other Iris devices at this time to avoid removing them. It is best if the device is within 10 feet of the hub.
          1. Press the button between the two outlets.
          2. The hub will beep when the device is successfully removed
Factory Reset

Press and hold the "Program" button on the receptacle until the locator LED turns Amber and then flashes Red. The receptacle is then reset and must be re-included to the network.
Was this answer helpful?YesNo
Topic Information
  • Topic #: 30143-875
  • Date Created: 02/22/2018
  • Last Modified Since: 03/05/2018
  • Viewed: 7


Help & Resources for
Your Iris Smart Home

To check the status of the Iris platform, click here.

Contact Us

Questions about Iris? Call us now for immediate assistance.
Hours of operation: 8am – 1am EST